191 fs ski pylon

the-mees

Registered Member
I am interested in buying a 191 fs. Is there anyone that has the never ski pylon with rear braces. Can you tell me possibly who makes it, The rated weight it can pull safely, How much you have pulled, And do the braces interfere with the engine in the up or down position. My maximum pull would be two skiers or two tubes. Thankyou.
 
T

Trawles

Guest
I have an '05 F/S that came with a Swivl-Eze P926A (this is the only number I can find on it). It does not interfere with the engine (Yamaha F150) in the up or down position. The rear brace actually works well as a grab bar when entering from the swim platform. I have pulled 4 teenagers on 4 tubes. I am sure this is well beyond the rated limit of the bar, but it was alot of fun and did not hurt anything. Just be careful not to clink their heads together. Hope this helps.
 

Jazucche

Registered Member
Premium Member
State
Wash
Can anyone familiar with the 191 FS tell me if the factory ski pylon had a threaded base. I have a 2007 and am trying to locate a pylon that fits with the original hardware on the boat.
 

Jazucche

Registered Member
Premium Member
State
Wash
Thanks a photo would be great!
Are there any part #s or manufacturer information on the pylon?
 

mallahan

Registered Member
City
Everett
State
WA
Also there are side braces that clip on the pylon and attach near the transom. I can set it up and take a photo tomorrow if you need that.
 

mallahan

Registered Member
City
Everett
State
WA
I don’t use the pylon since pulling a tube behind makes it difficult to get them outside the wake. I just attach the line to my aft cleat and works well. Hasn’t pulled out the cleat yet
 
Top