Dave LeGear
Contributing Member
- City
- What's left of Pine Island
- State
- Florida
Found this while researching for another subject, but have seen this as being a problem for many And most of these issues stem from not being able to fold down the windshield, and it's respective grab bar so it can get backed into the Garage. Here is an option (locking hing pin) to review and see if this will help?
Cut the grab bar to fit and install this quick release pin hinge so it now folds when needed... And you can find out more here:
https://store.canvas-boat-cover-and-repair-advisor.com/Locking-Rail-Hinge-with-Quick-Release-Pin-p/h1043.htm?CartID=0
I also found what appears to be larger ones here:
https://www.amazon.com/dp/B08G83XSJX/ref=cm_sw_em_r_mt_dp_ZP6DYHZBV5NNN42H1TQ2?_encoding=UTF8&psc=1
As far as the actual windscreen goes, twisting quick release pins on the bottom, would more than likely be your best bet and these were the ones I found:
https://smile.amazon.com/dp/B001F0GRKQ/ref=cm_sw_em_r_mt_dp_dl_0QXGDW9WY17K5WHC3QMZ
Hope this helps!
Dave
Cut the grab bar to fit and install this quick release pin hinge so it now folds when needed... And you can find out more here:
https://store.canvas-boat-cover-and-repair-advisor.com/Locking-Rail-Hinge-with-Quick-Release-Pin-p/h1043.htm?CartID=0
I also found what appears to be larger ones here:
https://www.amazon.com/dp/B08G83XSJX/ref=cm_sw_em_r_mt_dp_ZP6DYHZBV5NNN42H1TQ2?_encoding=UTF8&psc=1
As far as the actual windscreen goes, twisting quick release pins on the bottom, would more than likely be your best bet and these were the ones I found:
https://smile.amazon.com/dp/B001F0GRKQ/ref=cm_sw_em_r_mt_dp_dl_0QXGDW9WY17K5WHC3QMZ
Hope this helps!
Dave
