What's new

Home Made Bait Holder

NJWardy

NJWardy

Participating Member
City
Audubon
I saw this on the internet somewhere and decided to try and build one for myself. Got everything from Home Depot for about $30 and it took about 3 hours to make. Toughest part was heating and bending the 1/2" PVC.

Parts:
1/2" x 10' PVC pipe (x3)
1/2" PVC T-Joints (x11)
1/2" PVC Cap
Plastic (or Nylon) fencing 3' x 25' with 1/4" holes
8" Wire Ties
Pool Noodle
Bungee Cord

full


full
 
Last edited by a moderator:
This is excellent! Thank you!
 
That is the one I saw and based mine on. I decided to use 2 supports rather than the single center pole. It has to be easier to catch the bait without the pole.
 
Super job, I gotta try that. Thanks for sharing.
 
In follow-up: It has been in the water for over a month. I added a pint of minnows and have added a few more that I caught in my trap and not one has died (unless I used them for bait). I throw in a bunker tail every 2 weeks. I gotta tell ya, it is a real convenience to have the bait right there at my boat. They last much longer than in the minnow bucket.
 
You must log in or register to reply here.
Back
Top