richardbfin
Participating Member
- State
- UT
I am royally flummoxed on some dash switch issues. Neither the live well pump or the bilge pump are working. I've tested wire continuity from the switches to the bundle connector plug, but it goes south after that. ONE BIG QUESTION: In the photo I have circled and added an arrow to a thick wire (olive green) that is screwed down on a lug at the base of the inlet for the wash down pump and for the live well pump (the pump is at the top). That green wire runs up to the console, but isn't attached to anything. Could this be part of my problem? I'm not sure how grounding that inlet/pump base helps anything, but it seems strange that it is unconnected at the console.