Trim Tabs with Swim Platform

[OffshoreDreamer]

Dick,

Is it possible to install trim tabs on a 210 with the swim platform? Thanks

Mike

 

[OspreyVic]

Hello Mike, this is Vic in Osprey FL.



If you would please open the "Photos" section, and then the "210 Modifications", now go to page 2 and locate the pictures titled "Stern view of Radar Arch" and "Port View of Radar Arch". If you click on them to make them larger, hopefully you can see the factory installed Lenco trim tab, under the swim platform.



Hope this helps.



Vic

 

[NCangler]

I have 12x12's on my 210 with the swim platform. I think 12x12's are overkill by the way.

 

[ILLOGICAL GGC]

i put lenco 12x12 and had to drill a hole in the lenco hinge flange that mounts to the transom for 1 of the ladder support screws to fit back where it was orign. ,but it was no problemo
GGC

 

[OffshoreDreamer]

Thanks guys. I'll look at the photo.

 

[ILLOGICAL GGC]

finally got my pics uploaded from camera. this is how i have my lencos installed the ladder is a bit compressed to get the 800x600 requirements to upload these are 12x12 and they fit nicely , maybe not as far out as some would ---but they work for me
robert